Video Bandwidth controls (Figure 2-8) allow you to select between the default High bandwidth output, or Medium and Low reduced bandwidth options which, dependent on your network throughput capabilities and other traffic, or size of the image required to display on the receiver, may work better for you.

The highest Video Bandwidth setting outputs the same video format as you have selected using the Output DIP switches, located near the 3G-SDI connector on the camera’s connector panel.

NOTE: The various DIP switch configurations for different output formats are depicted on a sticker on the underside of PTZ1’s pedestal base. Typically, you might choose something like 1080p/59.94, or 1080p/50.

From left to right, the other Bandwidth options correspond to SD and 720P output formats.



For more information please download the entire document at

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Article is closed for comments.