TriCaster XD series- Video Input showing up Black and White


  • Check to make sure you have your video input connected to the proper inputs on the TriCaster.
    • Component, Y = Green, Pb = Blue, Pr = Red
    • Composite, unless otherwise marked “composite” use the Y input.
    • S-Video is labeled Y/C and connected using the Pb and Pr inputs
    • SDI is labeled SDI
  • If the video source is properly connected. Check the input configuration in TriCaster Live Production.
    • Click gear icon next to the video input you are experiencing the problem on. Then under the connection type drop down menu, ensure the proper signal type and resolution is selected.
    • If you’re still experiencing problems, contact NewTek Support.


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Article is closed for comments.