NDI video settings for PTZ Optics camera

If a PTZ Optics NDI camera source name is visible within NewTek software but the video input only displays black output, then check the following setting within the camera. 



Go to the camera's web interface using the camera's IP address.  The default IP address for PTZ Optics cameras is typically

On the left side menu select Network. On that page make these changes:


1. RTMP(s) Settings > First stream MRL = Off

2. RTMP(s) Settings > First stream MRL = Off

3. RTSP Settings > RTSP Auth = Off


You may need to restart the camera and the NDI application to view the video output.


Current as of 9/14/2021

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Article is closed for comments.